Note that the this documentation is for the old 5.1 release.
For the newest documentation, please see the current release documentation home.

Running a simple harvest

Owned by Colin Samuel Rosenthal
Feb 24, 2016
Walkthrough of the definition and execution of a simple harvest.

Running a simple harvest

The system is now up and running, and you can try out the harvesting and archiving capabilities.

This section will guide you through the steps needed to

  • harvest and store a domain
  • browse the harvested material in a browser

Setting up the harvest

Start the program as described in section "Starting simple_harvest version".

Open http://localhost:8074/HarvestDefinition in a browser on the local machine.  (Replace the host name if the QUICKSTART is running on another machine)

You can now define a new harvest.

Click 'Selective Harvests' under menu 'Definitions'

Click 'Create new selective harvest definition' under the (empty) table of existing harvests.

Enter an arbitrary name for the harvest in the top. Enter some second-level domain name (e.g., netarkivet.dk) in the box and press 'Add domains'. Since the domain didn't exist in the database, the system suggests you add it. Click 'Create and add to harvest definition'.

Preferably the domain should be one that you know you have permission to harvest. By default, NetarchiveSuite will harvest up to 1GB of data from a domain so you may wish to choose a small domain for your first tests. You can add more domains if you want by repeating the procedure, but in this example we will only add one domain.

You can now click 'Save' on the 'Selective Harvest' page

Now you have defined a harvest definition for this domain. It will however not start a harvest before it is changed to active state.

Click 'Activate' for the newly defined harvest. NetarchiveSuite will now generate harvest jobs for the harvest definition.

Go to the Job Status page by clicking 'Harvest status'. Set wanted jobs status to 'All' and click 'Show'. Refresh the page periodically until a job appears and changes to state "Started". This should take no more than two minutes. At this point, a harvester has started harvesting, using the Heritrix web harvester.

Now you can monitor the system state for what is going on in the various components. That way you can see how the harvester is proceeding with the job:

Go to the System Status page by clicking 'Systemstate'. Click on the application HarvestControllerServer. The most recent log record will give status information from Heritrix. You can find more application information by clicking on 'Show all' in the Index column.

You can find more details about the running job by going to the Running Jobs page:

The job will after a minute or two appear as running and the progress of the jobs can be followed here. A link to the running Heritrix3 crawler can be found in the Host column, as long as the job is running.The GUI can be accessed using the standard Heritrix login "admin" and Password "adminPassword" (Note: you will need to add the name of your PC as an exception to your browser's proxy configuration.

Go to the Job status page by clicking 'Harvest status'. Set wanted jobs status to 'All' and click 'Show'. It will take a little while for the job to finish and to upload the harvested files to the NetarchiveSuite archive (about 5 min.). Refresh the page until the job changes state to "Done".

Viewing the results

Harvested jobs can be viewed in an ordinary browser. Part of the NetarchiveSuite is a "viewerproxy", that integrates with your browser to show you harvested material for Quality Assurance.

In order to use viewerproxy it is essential that you have followed the instructions for proxy setup. Once that some web pages have been harvested, you can use the viewerproxy part to view them. Before it is ready, it needs to know which material you wish to browse.

  1. Go to the 'Harvest Status' page, select to show 'All' jobs and click 'Show'. Click on the link with the Job Id.
  2. Click on 'Select this job for QA with viewerproxy'. This will make the viewerproxy browse in this job. It will take it a while to generate an index. It will then go to the viewerproxy status page.

Now simply enter the URL that you started harvesting from (with www), e.g. www.netarkivet.dk. It shows you the harvested material. If you go to a URL in another domain, you will get an error. Depending on the layout of the domain you harvested, there may also be missing pages or images from that domain.

The NetarchiveSuite allows automatic collection of unharvested URLs during browsing, i.e. the NetarchiveSuite allows you to browse in the collected material while it automatically collects URLs for missing pages or images that you request. This makes it easy to identify missing harvested material, when you are doing Quality Assurance on the harvested material.

To try this, go back to the viewerproxy status page and click 'Start collecting URLs'. Now browse in the collected material until you find a page or image that did not get harvested. Go back to the viewerproxy status page and click 'Show collected URLs'.

The list will contain several URLs, including the ones you just requested and found missing during collection of URls.