Page Comparison

...

Pause a Harvestjob in the Heritrix GUI

Under "currently running jobs" there In "Harvest status -> Running jobs" the Host field is a link to the relevant Heritrix GUI. Click on this (admin/adminPassword) and pause the job. (If there are firewall problems it might be necessary to login to the harvester machine and start a webbrowser on that machine instead.)

...

Edit the Job and Resume job

1. In the Heritrix GUI, add an override for the domain netarkivet.dk, where max-hops is 15 and delay-factor 1.5Click on "Resume" on the Heritrix Consolechoose Jobs -> Edit Configuration and click the Overrides header link to enter a Quick override.  Type "netarkivet.dk" in the Domain text box and click "Create/Edit".
   Image Added
   
   Set max-hops to 15
   Image Added
   Set delay-factor to 1.5
   
   Image Added
    and click "Done with the override" at the bottom.
   
   Image Added 
2. "Override changes saved" confirms the changes are saved.
3. Switch back to "Console" and click on "Resume".
4. Confirm that the job is running again in the NAS System overview.

Restart The System

1. Stop and Restart NASNAS with the "stop_test.sh" command and restart it with the "start_test.sh" command. After some time, a job should appear in the state "Failed".
   
   Image Added 
2. Restart the job by clicking the "Restart?" button. A new job should be created and the old one should have the status "Resubmitted (Job X)".
3. Wait for the job to finish.

...