Contents

Choose a platform

NetarchiveSuite can be installed in a number of different ways, with varying numbers of machines on different sites. There are a number of separate applications in play, most of which can be put on separate machines as needed. To keep clear what is necessary for which setups, we will consider the following types of setup:

A. Single-machine setup. This corresponds to the setup used in the Quick Start Manual, where all applications run on the same machine, and file transfer are done by simply copying files locally. It is the simplest setup, but does not scale very well.
B. Single-site setup. In this scenario, multiple machines are involved, necessitating file transfer between machines and multiple installations of the code. However, the machines are expected to be within the same firewall, so port setup should be no problem.
C. Single-site setup with duplicate archive. This expands on the single-site set-up in that more than one copy of the archived files are used, using the concept of separate "Replica" to indicate the duplicates.
D. Multi-site setup. When more than one site (physical location) is involved, separated by firewalls, extra issues of opening ports and specifying the correct site come into play. This is the most complex scenario, but also more secure against systematic errors, hacking, and other disasters.

Choose Repository

Scenario A and B from section Choose a platform involve having a local arcrepository without means of bitarchive replicas. This is configured by a plug-in (please refer to Configure PlugIns in the Configuration Manual).

Scenarios C and D from section Choose a platform involve having distributed bitarchive replicas. In these scenarios we have at least two bitarchive replicas. The Replica information must be configured before deployment either in the local settings file or included in the deploy configuration file for your system (please refer to Configure Repository in the Configuration Manual).

Choose the type of database

The NetarchiveSuite can use three types of database:

Derby database (default)
PostgreSQL
MySQL database

By default, the NetarchiveSuite uses an external Derby. Note that from release 3.14.* the choice of an embedded Derby database has been removed to allow several applications to access the database simultaneously. The choice of the database is further described in the section on Plugins.

In fact NetarchiveSuite uses up to three distinct databases depending on which modules of NetarchiveSuite are deployed - a harvest database, an arcrepository administration database, and a wayback indexing database.

The wayback database is configured through hibernate and should be neutral as to which flavour of database is used. The harvest and admin databases are configured via NetarchiveSuites settings file or by the use of deployment settings if the NetarchiveSuite deploy-application is used.

Derby is used in the QUICKSTART installation, but from version 3.20.0 Postgresql is fully supported and is recommended for large archives where it should have superior performance and better support from external tools.

Derby Database

If you want to use a Derby database, you have to run it as a separate process. If the deploy utility is used, then setting the elements <deployHarvestDatabaseDir>harvestDatabase</deployHarvestDatabaseDir> and <deployArchiveDatabaseDir>adminDB</deployArchiveDatabaseDir> will automatically result in the deployment and start of databases in the specified directories. If you prefer to configure the databases by hand you should

Start Derby separately
cd "directory with the extracted database" (e.g. <deployInstallDir>/<deployHarvestDatabaseDir>)
export CLASSPATH=<deployInstallDir>/lib/db/derbynet-10.4.2.0.jar:<deployInstallDir>/lib/db/derby-10.4.2.0.jar
java org.apache.derby.drda.NetworkServerControl start -p port

The default port is 1527. Similarly set up a derby for the admin database on its own port.

For the NetarchiveSuite to use this kind of external database, you need to

Set the setting settings.common.database.class to dk.netarkivet.harvester.datamodel.DerbyServerSpecifics.
Set the setting settings.common.database.url to jdbc:derby://<deployMachine>:1527/fullhddb (substitute the server host for <deployMachine> and 1527 for correct port)
Set dk.netarkivet.archive.arcrepositoryadmin.DatabaseAdmin to dk.netarkivet.archive.arcrepositoryadmin.DerbyServerSpecifics.

Need to add a permission to the policy file used by your installation, if you use security (see below). The following will allow NetarchiveSuite to access a Derby database on port 1527.

grant {
  permission java.net.SocketPermission "127.0.0.1:1527",
    "connect, resolve";
};

Firewall note: You will need to allow the GUIApplication and the HarvestTemplateApplication to be able to access port 1527 on the server where you run the database.

More details on using Derby as a server are available on http://db.apache.org/derby/docs/dev/adminguide/cadminov825266.html the derby pages.

MySQL Database

If you want to use a MySQL database, you have to:

Set the setting settings.common.database.class to dk.netarkivet.harvester.datamodel.MySQLSpecifics
Set the setting settings.common.database.url correctly: jdbc:mysql://localhost/fullhddb?user=root&password=secret (substitute the server host for localhost, and username/password for root/secret)
Install the MySQL database (v. 5.0.X) on a machine of your choice
Download a mysql-connector-java-5.0.X-bin.jar from http://dev.mysql.com/downloads/connector/j/5.0.html
Add a permission to the policy file used by your installation, if you use security. The following will allow NetarchiveSuite to access MySQL on localhost on the default port 3306.
```
grant {
  permission java.net.SocketPermission "127.0.0.1:3306",
    "connect, resolve";
};
```

Firewall note: You will need to allow the GUIApplication and the HarvestTemplateApplication to be able to access port 3306 on the server where you run the database.

This jar must then be added to the classpath for the applications, that accesses the database: GUIApplication and HarvestTemplateApplication

You can do this manually, when starting these applications. Alternatively, you can add the mysql-connector-java-5.0.X-bin.jar to the lib/db directory, and modify build.xml accordingly:

Add a line db/mysql-connector-java-5.0.X-bin.jar to the property jarclasspath just below the line db/derby-10.1.1.0.jar.
Add a line {<include name="db/mysql-connector-java-5.0.X-bin.jar"/> below include name="db/derby-10.1.1.0.jar/>

You can then generate a new NetarchiveSuite zipball with

ant releasezipball

.

This assumes, that you have downloaded the source distribution of the NetarchiveSuite.

PostgreSQL Database

NetarchiveSuite comes with scripts to initialise postgresql databases for both the harvest database and the admin database. These are in

scripts/sql/createHarvestDB.pgsql
scripts/sql/createAdminDB.pgsql

Read the header of createHarvestDB.pgsql carefully. It describes how to create a separate tablespace foe indexes. If these instructions are not followed, no such tablespace will be created and this will have a disastrous effect on NetarchiveSuites performance.

The settings for the two database connections look something like

<settings>
                <archive>
                    <admin>
                        <class>dk.netarkivet.archive.arcrepositoryadmin.DatabaseAdmin</class>
                        <database>
                            <class>dk.netarkivet.archive.arcrepositoryadmin.PostgreSQLSpecifics</class>
                            <baseUrl>jdbc:postgresql</baseUrl>
                            <machine>localhost</machine>
                            <port>5432</port>
                            <dir>admindb</dir>
                            <username>test</username>
                            <password>test123</password>
                        </database>
                    </admin>
                </archive>
                <common>
                    <database>
                        <class>dk.netarkivet.harvester.datamodel.PostgreSQLSpecifics</class>
                        <baseUrl>jdbc:postgresql</baseUrl>
                        <machine>localhost</machine>
                        <port>5432</port>
                        <dir>harvestdb</dir>
                        <username>test</username>
                        <password>test123</password>
                    </database>
                </common>
            </settings>

The meaning of the various settings should be fairly obvious: they specify the machine and port-number of the postgresql server, the names of the two databases and the credentials for accessing the databases.

Choose a JMS broker

NetarchiveSuite requires a JMS broker to run. The only type of JMS broker supported at this time is the SunMQ broker and its open source counterpart Open Message Queue.

The installation and start-up of a JMS broker is described in Appendix A - Necessary external software.

For description of how to configure the JMS broker, please refer to the JMS section in Installation Manual.

Firewall note: The machine that runs the JMS broker must be accessible from all machines in the installation on not only port 7676, but also port 33700 (from RMI).

Java

All machines must run Java version 1.6.0 or higher.

Choose the set of machines taking part in the installation/deployment

When you have chosen a scenario, you must decide on the number of machines, you want to use in the deployment of the NetarchiveSuite. For scenario A, the answer is of course one. For the scenarios B, C, and D, the answer is more complicated.

An extra complication is added by installing the system at two different physical location (here referred as EAST and WEST). The distinction between different physical location are relevant if the system is installed at two different institutions with firewalls between them.

At the Danish installation, we operate with 4 kinds of machines:

Admin machine (one server): Here we deploy one or more BitarchiveMonitorApplications (one for each bitarchive Replica), one ArcrepositoryApplication, one GUIApplication, and a JobManagerApplication, which takes care of job scheduling.
Harvester machines (one or more): Here we deploy the HarvesterControllerApplications.
Bitarchive machines (one or more): These machines only run one BitarchiveApplication each (there must be at least one for each bitarchive Replica).
Access servers (one or more): On these machines, we have the ViewerproxyApplication enabling us to browse in already stored webpages, and the IndexServerApplication. The latter must only be installed on one of the access-servers, as there can only be one in the system.

Apart from the HarvestControllerApplications, there is no requirement that the applications are placed like this, but we will use it as an example throughout the rest of the manual. In the standard set-up used in our test-environment, we have 9 machines:

1 bitarchive server (on physical location WEST)
2 bitarchive servers (on physical location EAST)
1 admin machine (placed on physical location EAST)
1 harvester-machine (placed on physical location WEST)
2 harvester-machines (placed on physical location EAST)
1 access server (placed on physical location WEST)
1 access server (placed on physical location EAST)

Choose other plug-ins

Except from the plug-ins described in this section, the installation of plug-ins consists only of the configuration of them.

Browser not supported